The ARC System Type 1 & 2 The revolutionary ARC System offers easy lap and time counting and accurate race results from a fully automatic system.
Type 1 is for the Mini-Z and Type 2 uses the TD-1.

Type I (6 or 12 car system available)

•KO recommends this system for Kyosho Mini-Z racers.
•No transponders are required in the cars in order to operate the system.
•The system counts radio waves which are emitted by the receivers crystal.
•Size of the car doesn't matter.
•No additional weight to the car so not to spoil the performance or affect   handling.
•Ordinary lead wire can be used as a loop. Therefore it can be installed on the   surface, buried in the ground or in a bridge above the track.
•Up to 12x 27Mhz frequencies can be used.
•Energy saving system with approx. 4 hours operation using 8.4V 2000mAh   Ni-cad battery. (optional)
•Easy to use and accurate counting with simple design.
•Connect to your PC with RS232C cable (optional). Can be used with   commercially available software for accurate lap count, lap time counting and   race results.
•Counting software for testing is included.

Type II (10 or 20 car system available)

ARC System Type II Onboard signal transmission device (TD-1)
The ARC System is designed to receive a low power signal from the receiver's crystal. This is ideal for small sized car i.e. 1/24th. However under certain circumstances the signal is not stable depending on the car. With the TD-1 unit, stable signal emission has been achieved. In order to minimize the running cost, the power source for this unit is taken from the receiver's power supply and the lead wire is detachable in case of damage. There is no need to worry about charging and the units are maintenance free. Parts can be replaced in order to keep the running cost low. Small and light weight (1/2 oz.) thus does not spoil the overall weight of the car.

Units Includes (ARC Type I & II)

ARC Main Unit
Loop Terminal Box
Loop (60ft.)
Loop Terminal Box Connecting Cable (30ft.)
Connector Lead with DC in Jack
Noise Killer Core
Test Purpose Software (Win95+ on Floppy Disc)
Instruction Manual
Entry Tags (10 pcs) for ARC Type I
TD-1 (10 or 20) for ARC Type II
Item #
DESCRIPTION
REMARKS
ARC-106
ARC Type I for Mini Cars 6X27MHz Solid Frequency System Installed Frequencies
26.995, 27.045, 27.095, 27.145, 27.195, 27.255 Mhz
ARC-112
ARC Type I for Mini Cars 12X27MHz Solid & Split Frequency System Installed Frequencies
26.975, 26.995, 27.025, 27.045, 27.075, 27.095, 27.125, 27.145, 27.175, 27.195, 27.255, 27.255 Mhz
93019
ARC Type II (TD-1 Compatible) 10 Car System Include 10x TD-1 (01-10)
93020
ARC Type II (TD-1 Compatible) 20 Car System Include 20x TD-1 (01-20)

 

(Transmitting Devise - 1) #93021

The TD-1 is used for the Type-2 system. Comes with TD-1 housing, entry chip and connecting wire (8 in.).

ARC Entry Tag for Mini-Z (#93002)


The entry tag is used to boost the signal from the Mini-Z car with weak signals for the Type-1 system. This is placed directly over the Rx crystal. Comes with 3 pieces.
TD-1 Connecting Wire

The TD-1 connecting wire comes in two lengths. The 8 inch (20cm) is the standard replacement (#93022). Also available in 4 inch (10cm) as a replacement (#93023).

Twin Extension Wire for TD-1 (#93025)
The twin extension wire is an accessory for the TD-1. This is used for receivers that do not have a third channel available or to be used in-between the battery connection.
Entry Chip (#93101~20)

Replacement entry chips are available for the TD-1 by chip number.